Product Specification
The Shardlow composite edge trims are made to finish the edges of the Shardlow composite products. Use for edging deck boards or with cladding around window reveals, comers or to finish off the sides.
Please Note
Only available with the Shardlow composite decking and cladding range.
Need to know
It is always advisable to check on your local planning portal when considering cladding to see if planning permission is required.
Being made from recycled wood composite Shardlow cladding reacts like wood. It can be cut with standard woodworking tools. Like wood it also goes through expansion and contraction in accordance to the ambient temperatures. Care should be taken when installing as the cladding can be brittle until fitted. If using screws always pilot hole the cladding slightly bigger than the screw and do not over tighten as this can cause splitting.
These boards will undergo a weathering process before stabilising. This process will see the boards lighten by roughly 10% and is perfectly normal.
While every effort is made to present the colours on our website, discrepancies can occur especially when considering difference between monitors etc. Please bear this in mind when ordering. You are more than welcome to book an appointment and come and look at the wide range on offer.
Please ensure you order sufficient product to complete your project. If you find you require additional material later, you may be supplied from a different batch. Therefore, there could be a slight difference in width or shades.
We do not offer refunds or exchanges on the following
- products that have been cut down
- made to measure items
- (unless it is established, they have developed a manufacturer’s fault).
USUAL DELIVERY LEAD TIMES IS BETWEEN 1 AND 2 WEEKS BUT THIS CAN VARY DURING HIGH DEMAND.
Please refer to our terms and conditions